New2026 ITI Cargo 7×16 Enclosed Cargo Trailer – Black Out Package

Sleek Style Meets Heavy Utility: 2026 ITI Cargo 7×16 XE Enclosed Trailer (7K GVWR)

Factory Charcoal Blackout Edition with 7’ Interior Height & Black Aluminum Wheels

If you are looking for a 7×16 that stands out on the road and handles real work without breaking a sweat, this is the configuration. We spec’d this unit in a premium Charcoal finish paired with a factory Blackout Package and matching black aluminum wheels, giving it an incredibly sharp, high-contrast look behind any truck.

Beyond the aesthetics, this trailer is packed with a few smart, practical upgrades that turn it into a highly capable workspace. With an extra-tall 7-foot interior ceiling and a reinforced 16″ on-center floor framework, it is perfectly dialed in for full-sized side-by-sides, commercial landscaping equipment, or heavy tool layouts.

Key Capacities & Dimensions

• GVWR: 7,000 lbs (Tandem Axle Class)

• Curb Weight: Approx. 2,250 lbs

• Payload Capacity: Approx. 4,750 lbs

• Internal Box Dimensions: 7′ Wide x 16′ Long (+ 18″ Aerodynamic V-Nose)

• Interior Height: 84″ (7’0″ Ceiling Clearance)

• Rear Door Opening: Approx. 77″ Width x 80″ Height (High-Clearance Entry)

• Ramp Capacity: 1,500 lbs load rating with spring assist

Technical Specifications

Feature Specification

Main Frame & Tongue Heavy-Duty Structural Steel Tube Chassis

Floor Crossmembers Upgraded 16″ On-Center Spacing (Heavy-Duty Foundation)

Wall Studs 2″ x 1″ Steel Tube Wall Posts (24″ On-Center Spacing)

Exterior Skin Premium .080″ Heavy Composite Panels (Charcoal)

Exterior Trim Factory Blackout Package (Black Trim, Black Nose Cap, Black Rear Hoop)

Fastening System 100% Screwless Exterior Sidewalls

Running Gear (2) 3,500 lb. Drop Spring Brake Axles (7K Class)

Wheels & Tires Upgraded 15″ Black Aluminum Wheels / ST205/75R15C 6-PLY Radials

Flooring 3/4″ Engineered Wood Decking

Interior Tie-Downs (4) 5,000 lb. Recessed D-Rings with Bolted Steel Backing Plates

Side Access Door 36″ Wide Flush Lock Side Door with Black Trim

Stone Guard 24″ Black Aluminum Tread Plate (ATP)

Corrosion Protection BATTLECOAT Polyurea Tongue Coating & Asphalt Undercoating

Electrical / Plug Round 7-Pin Blade Connector / Full DOT LED Lights

Standout Feature Highlights

1. Premium Charcoal Blackout Styling

   This unit moves away from standard utility looks. The factory-installed Blackout Package covers all exterior trim extrusions, the front V-nose cap, the rear structural ramp hoop, and the 24″ front stone guard in a clean black coat. Paired with the smooth Charcoal composite panels and upgraded black aluminum wheels, it delivers a polished, premium aesthetic.

2. Extra-Tall 7-Foot (84″) Walk-In Height

   The expanded 84-inch interior ceiling clearance provides a spacious, walk-in environment that lets you work comfortably inside the box. Crucially, this taller profile expands the rear ramp door opening to a full 80 inches of vertical entry clearance, allowing you to roll in lifted off-road UTVs, side-by-sides, or tall commercial gear racks without worrying about roof clearance.

3. Reinforced 16″ On-Center Floor Framework

   To ensure long-term durability under heavy loads, the floor crossmembers on this unit are spec’d at a tight 16 inches on-center. This creates a much more rigid steel foundation beneath the 3/4″ engineered floor, distributing concentrated wheel loads evenly and preventing the deck from sagging or waving over years of hauling.

4. Heavy-Duty Recessed 5K Tie-Down Package

   Securing your cargo is simple and safe. The deck comes pre-equipped with four 5,000 lb. rated recessed D-rings. Rather than being screwed directly into the wood where they can pull free under stress, these anchors are factory-secured with bolted heavy steel backer plates directly into the steel frame underneath.

5. Smooth, Screwless Exterior Skin

   The exterior features thick .080″ composite panels bonded with a completely screwless layout. This advanced bonding method eliminates hundreds of mechanical fasteners, creating an ultra-flat, smooth profile that limits thermal expansion waves (“oil-canning”) and offers a perfect canvas for company graphics or decals.

Pricing & Yard Terms

• Price: Cash/Check Price Listed

• Processing Fees: A 3% processing fee applies to credit card transactions.

• Financing: Competitive financing options are available through multiple lenders.

• Dealer Fees: $0. We charge absolutely zero documentation, prep, or administrative fees.

• Documentation: Temporary license plate/transit registration included with your purchase for immediate road use.

• Sales Tax: NJ residents pay 6.625% sales tax at purchase. Out-of-state buyers are exempt from NJ sales tax and pay their local rate at registration.

• Availability: 7×14 and 7×16 Charcoal Blackout units turn over very quickly. Please call the shop directly to confirm current lot stock.